Shop

Grid List

Showing all 15 results

Vacuum Sealed Filament Container: Package of 5

Vacuum Sealed Filament Container: Package of 5
$109.95

Vacuum Sealed Filament Container: Package of 5

Vacuum Sealed Filament Container: Package of 5
$109.95

The ultimate filament storage solution for 3D printing filaments to prevent the filament from absorbing moisture

[Now with PC material.]

Includes: 5-pack with a vacuum pump  (Filament spool not included)

To separate any containers that may be stuck together upon receiving the package, place a lid on top of the first container, use a hand pump to give it a few pumps, and the first container should come apart easily. 

PrintDry Filament Dryer PRO3

PrintDry Filament Dryer PRO3
$199.00

For quality 3D printing

  • Easily adjust the temperature with 6 presets (35ºC, 45ºC, 55ºC, 65ºC, 75ºC, and 85ºC).
  • Built-in timer with a maximum time of 48 hours.
Note: The temperature readings are directly measured at the tip of the temperature sensor, located about 15 mm away from the hot air vent. The temperature distribution inside the dryer is NOT uniform. The temperature in a place close to the hot air vent is higher and the temperature in a place far away from the hot air vent is lower.

PrintDry™ Filament Container 6 Per Box

PrintDry™ Filament Container 6 Per Box
$75.00

PrintDry™ Filament Container 6 Per Box

PrintDry™ Filament Container 6 Per Box
$75.00

PrintDry Filament Container For 3D Printing filaments

  • Package of 6
  • Container overall size: 265(OD) x 100(H) mm   (10.5″OD x 4″H)
  • Filament spool size (max): 205(OD) x 72(H) mm  (8″OD x 2.9″H)
  • Material: PP

Large Spool Kit (double-wall)for PrintDry Filament Dryer PRO/PRO3

Large Spool Kit (double-wall)for PrintDry Filament Dryer PRO/PRO3
$39.99

Large Spool Kit (double-wall)for PrintDry Filament Dryer PRO/PRO3

Large Spool Kit (double-wall)for PrintDry Filament Dryer PRO/PRO3
$39.99
  • Double-wall chamber
  • Used with the PrintDry Filament Dryer PRO/PRO3.
  • To dry and feed up to 5Kg filament spool with max 300mm or 12” spool outside diameter.

Note: When drying and printing a new 12″ filament spool, please set the temperature 10C lower to start with.  After about 25% filament has been printed, then the temperature can be reset to the normal recommended temperature for this filament.  This will avoid filament over-heating.

Package includes:

  1. Plastic tray x1
  2. Long metal shaft x1

Additional Chamber Kit (double-wall) for PrintDry Filament Dryer PRO/PRO3

Additional Chamber Kit (double-wall) for PrintDry Filament Dryer PRO/PRO3
$53.99

Additional Chamber Kit (double-wall) for PrintDry Filament Dryer PRO/PRO3

Additional Chamber Kit (double-wall) for PrintDry Filament Dryer PRO/PRO3
$53.99
  • Double-wall
  • Used with the PrintDry Filament Dryer PRO3.
  • To dry and feed two more additional spools with max 200mm or 8″ spool outside diameter.

Note: Due to the stackable chamber design, you can use multiple additional chamber kits per dryer; however, the temperature and stability decrease as you add more chambers. We don’t recommend using more than two additional chamber kits per dryer.

Filament Re-spool Station

Filament Re-spool Station
$79.00$89.00

Filament Re-spool Station

Filament Re-spool Station
$79.00$89.00

Filament Re-spool Station

Only available for North America

Preparation: 2-3 business days.

 

Large Spool Shaft for PrintDry Filament Dryer PRO3

Large Spool Shaft for PrintDry Filament Dryer PRO3
$12.00

Contains only the shaft from the Large Spool Kit for PrintDry Filament Dryer PRO. Used to dry and feed up to 5Kg filament spool with max 300mm or 12” spool outside diameter. Requires at least 3 chambers to use.

D-Spool Allows for More Drying Of Filament

D-Spool Allows for More Drying Of Filament
$12.95

Dryer friendly filament spool

Filament Spool Holder

Filament Spool Holder
$28.00$38.00

Filament Spool Holder

Filament Spool Holder
$28.00$38.00

Designed to provide smooth and consistent filament feeding for 3D Printing, especially for flexible filament.

Our Standard Holder is designed to hold most 1kg spools and comes with a cantilever mounting piece, as well as two sets of spool adapters. Our Large Spool Holder can handle spools of up to 5kg filament.

 

 

Digital Humidity and Temperature Monitor

Digital Humidity and Temperature Monitor
$14.95

Only available for North America

Large filament spool container

Large filament spool container
$89.00

Non-vacuum filament container.

For 2 kg, 3 kg, 5 kg filament spool.

Dimension: 12″OD and 5.8″ thickness

Package includes:

  • 2x Large filament containers
  • 2x Regular filament containers

Pump for Vacuum Sealed Filament Container

Pump for Vacuum Sealed Filament Container
$9.95

Replacement pumps for Vacuum Sealed Filament Container: Package of 5

Ships from Canada

24 Hour Plug-in Timer

24 Hour Plug-in Timer
$14.95

Only available for North America.